Home About us Industrial products Contact us Distributors
 |
Application: shore A is designed to measure the penetration hardness of rubber, elastomers and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials. Shore D is designed for plastics, Formica, Epoxies and Plexiglass. Application: shore C is designed for various foam and sponge.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Leeb hardness tester: MH180Technical Specifications:Measuring range： (170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA,(13-100)HRB Measuring direction：360°（↓↖↗↘↙→←↑） Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS Display：segment LCD Data memory：max. 100 groups（relative to impact times 32～1） Working voltage：3V（2 AA size alkaline battery） Continuous working period：about 100 hours（With backlight off） Communication interface：RS232 Main Application Die cavity of molds Bearings and other parts Failure analysis of pressure vessel, steam generator and other equipment Heavy work piece The installed machinery and permanently assembled parts. Testing surface of a small hollow space Material identification in the warehouse of metallic materials Rapid testing in large range and multi-measuring areas for large-scale work piece | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Leeb hardness testeer HL200 Compact metal case，suitable for use under poor working conditions. Test at any angle, even upside down. Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL Large screen(128×64 dot matrix LCD), showing all functions and parameters. With EL background light. Large capacity memory could store 500 groups information. Datapro Software to connect with PC via USB port. software calibration function. Outline :132*76.2mm Weight：345g Technical Specifications:Error and repeatability of displayed value
l Measuring range： (170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA,(13-100)HRB l Measuring direction：360°（↓↖↗↘↙→←↑） l Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS l Display：dot matrix LCD，128×64 dots l Data memory：max. 500 groups（relative to impact times 32～1） l Working voltage：3V（2 AA size alkaline battery） l Continuous working period：about 50 hours（With backlight off） l Communication interface：USB1.1 Main Application l Die cavity of molds l Bearings and other parts l Failure analysis of pressure vessel, steam generator and other equipment l Heavy work piece l The installed machinery and permanently assembled parts. l Testing surface of a small hollow space l Material identification in the warehouse of metallic materials l Rapid testing in large range and multi-measuring areas for large-scale work piece
Testing range:
Testing conditions:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | MH320 Portable Hardness Tester with printer Advantages Large screen(128×64 dot matrix LCD), showing all functions and parameters. Test at any angle, even upside down. Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately. Seven impact devices are available for special application. Automatically identify the type of impact devices. Large capacity memory could store 500 groups (Relative to average times32～1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc. Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit. Battery information indicates the rest capacity of the battery and the charge status. User calibration function. USB port with the PC humanity multi-functions data proceeding software. Original imported high speed thermal printer support the immediate printing function. It can save data permanently. NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing). Auto power off to save energy. Excellent after-sale service system for high quality products---two years’ guarantee and all life maintenance. Easy to buy and comfortable to use.
Main Application Die cavity of molds Bearings and other parts Failure analysis of pressure vessel, steam generator and other equipment Heavy work piece The installed machinery and permanently assembled parts Testing surface of a small hollow space Material identification in the warehouse of metallic materials Rapid testing in large range and multi-measuring areas for large-scale work piece Technical Specifications Measuring range：HLD（170～960）HLD Measuring direction：360° Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS Display：dot matrix LCD，128×64 dots Data memory： 500 groups max.（relative to impact times 32～1） Printing paper: width is （57.5±0.5）mm, diameter is 30mm Battery pack: 6V NI-MH Battery charger: 9V/500mA Continuous working period：about 150 hours（With backlight off, no printing） Communication interface：USB1.1 Outline dimensions：212mm×80mm×32mm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||