Shore hardness meter|rubber hardness meter|Plastic hardness teseter | foam hardness meter|Leeb Hardness Meter|Integrative Hardness Meter|hardness analyser| low cost hardness meter|

Leeb hardness meter ( new)  HT6561

Product synopsis
1.1 Typical Applications
* Die cavity of molds
* Inspection of bearing and other mass produced parts on a
production line
* Failure analysis of pressure vessel, steam generator and
other equipment
* Inspection of installed machinery, permanent parts of
assembled systems and heavy work pieces.
* Testing surface of a small hollow space
* Material identification in the warehouse of metallic materials
* Rapid testing in large range and multi-measuring areas for
large-scale work piece
1.2 Testing Features
* Palm size for narrow space.
* Test at any angle, even upside down.
* Direct display of hardness scales HRB, HRC, HV, HB, HS,
HL.
* Large memory could store 250 groups including single
measured value, impact direction, material and hardness
scale etc.
* User recalibration function allowed.
* Can communicate with PC computer for statistics and
printing by the optional cable.
* Manual or automatic shut down.
* Low battery indication.
1.3 Technical Specifications
Display: 12.5mm LCD with back light
Accuracy: Display error ±0.8% at LD=900
Measuring range: 200-900L
Conversion: HL-HRC-HRB-HB-HV-HSD
Materials: 9 different common materials
With RS232C interface
Memory: 250 data can be stored and re-readable
Impact device: D Will handle the majority of hardness testing
applications. Weight: 75g
Power supply: 2x1.5V AAA size battery
Dimension: 146×65×36mm
Weight: 130g (not including batteries)
Working temperature： - 10℃～＋50℃
Storage temperature：- 30℃～＋

Application: shore A is designed to measure the penetration hardness of rubber, elastomers and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials.

Shore D is designed for plastics, Formica, Epoxies and Plexiglass.

Application: shore C is designed for various foam and sponge.

Leeb hardness meter: MH180

Technical Specifications:

 Measuring range：

(170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA,(13-100)HRB

 Measuring direction：360°（↓↖↗↘↙→←↑）

 Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS

 Display：segment LCD

 Data memory：max. 100 groups（relative to impact times 32～1）

 Working voltage：3V（2 AA size alkaline battery）

  Continuous working period：about 100 hours（With backlight off）

 Communication interface：RS232

Main Application

 Die cavity of molds

  Bearings and other parts

 Failure analysis of pressure vessel, steam generator and other equipment

 Heavy work piece

 The installed machinery and permanently assembled parts.

Testing surface of a small hollow space

Material identification in the warehouse of metallic materials

 Rapid testing in large range and multi-measuring areas for large-scale work piece

Leeb hardness testeer HL200

Compact metal case，suitable for use under poor working conditions. Test at any angle, even upside down.

 Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL

Large screen(128×64 dot matrix LCD), showing all functions and parameters. With EL background light.

Large capacity memory could store 500 groups information.

Datapro Software to connect with PC via USB port.

software calibration function.

Outline :132*76.2mm    Weight：345g

Technical Specifications:

Error and repeatability of displayed value

l       Measuring range：

(170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA,(13-100)HRB

l       Measuring direction：360°（↓↖↗↘↙→←↑）

l       Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS

l       Display：dot matrix LCD，128×64 dots

l       Data memory：max. 500 groups（relative to impact times 32～1）

l       Working voltage：3V（2 AA size alkaline battery）

l       Continuous working period：about 50 hours（With backlight off）

l       Communication interface：USB1.1

Main Application

l       Die cavity of molds

l       Bearings and other parts

l       Failure analysis of pressure vessel, steam generator and other equipment

l       Heavy work piece

l       The installed machinery and permanently assembled parts.

l       Testing surface of a small hollow space

l       Material identification in the warehouse of metallic materials

l       Rapid testing in large range and multi-measuring areas for large-scale work piece

Testing range:

Testing conditions:

MH320 Portable Hardness Meter with printer

Advantages

Large screen(128×64 dot matrix LCD), showing all functions and parameters.

Test at any angle, even upside down.

Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.

Seven impact devices are available for special application. Automatically identify the type of impact devices.

Large capacity memory could store 500 groups (Relative to average times32～1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.

Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.

Battery information indicates the rest capacity of the battery and the charge status.

User calibration function.

USB port with the PC humanity multi-functions data proceeding software.

Original imported high speed thermal printer support the immediate printing function. It can save data permanently.

NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).

Auto power off to save energy.

Excellent after-sale service system for high quality products---two years’ guarantee and all life maintenance. Easy to buy and comfortable to use.

Main Application

Die cavity of molds

Bearings and other parts

Failure analysis of pressure vessel, steam generator and other equipment

Heavy work piece

The installed machinery and permanently assembled parts

Testing surface of a small hollow space

Material identification in the warehouse of metallic materials

Rapid testing in large range and multi-measuring areas for large-scale work piece

 Technical Specifications

Measuring range：HLD（170～960）HLD

Measuring direction：360°

Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS

Display：dot matrix LCD，128×64 dots

Data memory： 500 groups max.（relative to impact times 32～1）

Printing paper: width is （57.5±0.5）mm, diameter is 30mm

Battery pack: 6V NI-MH

Battery charger: 9V/500mA

Continuous working period：about 150 hours（With backlight off, no printing）

Communication interface：USB1.1

Outline dimensions：212mm×80mm×32mm