Medidor de vibraciones |Medidor digital de vibración |vibrómetro|medidor-vibraciones

Casa     Producto     contacto   ENGLISH

Características:

Con funcion Hold
Funcionamiento según norma ISO 2372
De uso muy apropiado para mediciones periodicas y detectar maquinas y partes desbalanceadas y otras fallas mecanicas o rodamientos en maquinas rotativas de todo tipo.
Dispone de un micro procesador con circuito LSI y base de tiempo de cristal lo que le confiere una alta resolución y tiempos de lectura muy breves.
Otorga lecturas digitales exactas sin errores.
El peso y tamaño es compacto y el funcionamiento muy fácil
Apropiado para ser utilizado por talleres de mantenimiento de Plantas Industriales en forma predictiva o de emergencia.
Los componentes utilizados son de calidad duradera y su cuerpo principal de ABS le da peso liviano y gran resistencia.
Su formato externo se adapta cómodamente a la mano.
De gran utilidad en casi todos tipos de industrias.

 Medidor de vibraciones RCVM-01   RCVM-02  RCVM-03  RCVM-04  RCVM-05  RCVM-06

      Medidor de vibraciones RCVM-01


Application: used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
Is pecifically designed for present measuring various mechanical vibration. So as to provde the data for the quality control, run time and equipment upkeep.
Iuse the high-performance acceleration meter, realize the repetitiveness and accurate measurement.
It has the function of displaying "Velocity, Acceleration, Displacement" in same time.
SPECIFICATIONS
Display: 4 digit LCD backlight
Measurement Range:
Velocity : 0.01-400.0 mm/s 0.000-16.00 inch/s true RMS
Acceleration : 0.1-400.0 m/s² 0.3-1312 ft/s² 0.0-40g equivalent peak
Displacement : 0.001-4.000mm 0.04-160.0 mil equivalent peak-peak
Frequency Range for Measuring:10Hz. to 10kHz.
Accuracy: 5% of reading + 2 digits
Metric/ Imperial conversion
Analogue Output: AC output 0~2.0V peak full scale
(load resistance: above 10k)
With Max. value hold and low battery indication
PC interface: RS232C or Bluetooth interface
( Cable and software is not included)
Power supply: 2x1.5v AA size (UM-3) batteries
Power off : Manual off at any time or auto power off is enabled by user
Operating conditions:
Temperature : 0-50 ℃
Humidity : below 95% RH
Dimensions: 124x62x30mm/4.9x2.4x1.2 inch
Weight: 120g (not including batteries)
Accessories included :
Powerful rare earth magnet 1 pc.
Accelerometer 1 pc.
Stinger probe (Cone) 1 pc.
Stinger probe (Ball) 1 pc.
Carrying case 1 pc.
Operation manual 1 pc.
Optional accessories: Headphones for use as electronic stethoscope
Cable and software for RS232C
Medidor de vibraciones RCVM-02(3D)
Application: used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
Is pecifically designed for present measuring various mechanical vibration. So as to provde the data for the quality control, run time and equipment upkeep.
Iuse the high-performance acceleration meter, realize the repetitiveness and accurate measurement.
It has the function of testing axle bearing situation.
SPECIFICATIONS
Vibration Sensor:3-Axis Piezoelectric accelerometer
Display: 4 digit LCD backlit
Axial Vibration: any one axis of X ,Y,Z or 3 axes of XYZ
Measurement Range:
Velocity : 0.01-400.0 mm/s 0.000-16.00 inch/s true RMS
Acceleration : 0.1-400.0 m/s² 0.3-1312 ft/s² 0.0-40g equivalent peak
Displacement : 0.001-4.000mm 0.04-160.0 mil equivalent peak-peak
Frequency Range for Measuring:10Hz. to 10kHz.
Accuracy: 5% of reading + 2 digits
Metric/ Imperial conversion
 Analogue Output: AC output 0~2.0V peak full scale
(load resistance: above 10k)
With Max. value hold and low battery indication
PC interface: RS232C or Bluetooth interface
( Cable and software is not included)
Power supply: 2x1.5v AA size (UM-3) batteries
Power off : Manual off at any time or auto power off is enabled by user
Operating conditions:
Temperature : 0-50 ℃
Humidity : below 95% RH
Dimensions: 124x62x30mm/4.9x2.4x1.2 inch
Weight: 120g (not including batteries)
Accessories included :
Powerful rare earth magnet 1 pc.
Accelerometer 1 pc.
Stinger probe (Cone) 1 pc.
Stinger probe (Ball) 1 pc.
Carrying case 1 pc.
Operation manual 1 pc.
Optional accessories: Headphones for use as electronic stethoscope
Cable and software for RS232C
Medidor de vibraciones RCVM-03

Applications：
Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.
* Can display the parameters of Displacement, Velocity and Acceleration simultaneously.
* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable measurements.
* With Max Hold function.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Bearing condition monitoring function.
* Use “USB data output” and “RS-232 data output” to connect with PC.
* Provide “Bluetooth ™ data output” choice.

Sensor   Piezoelectric Transducer
  Measuring Parameters & Range
  Acceleration: 0.1-300.0m/s² equivalent peak 985ft/s²
  Velocity:  0.01-300.00mm/s  true RMS  0.000~13.00inch/s
  Displacement: 0.001-3.000mm 0.04~120.0mil  equivalent pk-pk
  Frequency Range   Acceleration: 10 Hz ~ 10k Hz
  Velocity: 10 Hz ~ 1k Hz
  Displacement: 10 Hz ~ 1k Hz
  Accuracy   ±5% + 2digits
  Metric / Imperial Conversion  
  Max. Value Hold  
  Power Off   Manual Power Off or Auto Power Off
  Data Output   USB, RS-232
  Operating Conditions   Temperature: 0~50 °C Humidity: <90 %RH
  Power Supply   Lithium battery
  Dimensions   202x43x23 mm  ( 8.0x1.7x0.9 inch )
  Weight   130 g (Including Batteries)

Standard Accessories:
1. Main Unit
2. Carrying Case
3. Manual Book
Optional Accessories:
1. USB, RS-232 data cable with software
2. Bluetooth data out put with software

Medidor de vibraciones RCVM-04

* 2 same parameters in one display for 2 position measurement or 1 position measurement specified, showing 3 different parameters of velocity, acceleration and displacement in 1 display.

* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes.

* Individual high quality ccelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use “USB data output” and “RS-232 data output” to connect with PC.

Sensor   Piezoelectric Transducer
  Measuring Parameters & Range
  Acceleration: 0.1-400.0 m/s  Equivalent Peak; 0.3-1312 ft/s  ; 0.0-40g
  Velocity: 0.01-400.0 mm/s  True RMS; 0.004-16.00 inch/s
  Displacement: 0.001-4.000mm Equivalent Peak-Peak; 0.04-160.0 mil
  Frequency Range   Acceleration: 10Hz ~ 10kHz
  Velocity: 10Hz ~1kHz
  Displacement: 10Hz ~ 1kHz
  Accuracy   ± ( 5%n + 0.2 )
  Metric / Imperial Conversion  
  Analogue Output   AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k)
  Max. Value Hold  
  Power Off   Manual Power Off or Auto Power Off
  Battery Indicator   Low Battery Indicator
  Data Output   USB, RS-232
  Operating Conditions   Temperature: 0~50 °C Humidity: <90 %RH
  Power Supply   4 x 1.5V AAA size (UM-4) Battery
  Dimensions   140 x 73 x 35 mm
  Weight   330 g

Standard Accessories:
1. Main Unit
2. Magnetic Suction Seat
3. Piezoelectric Transducer
4. Probe (Cone)
5. Probe (Spherical)
6. Carrying Case
7. Manual Book
Optional Accessories:
1. USB, RS-232 data cable with software

Metro de vibración RCVM-05

* 3 same parameters in one display for 3 position measurement or 1 position measurement specified, showing 3 different parameters of velocity, acceleration and displacement in 1 display.
* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use “USB data output” and “RS-232 data output” to connect with PC.

Sensor   Piezoelectric Transducer
  Measuring Parameters & Range
  Acceleration: 0.1-400.0 m/s  Equivalent Peak; 0.3-1312 ft/s  ; 0.0-40g
  Velocity: 0.01-400.0 mm/s  True RMS; 0.004-16.00 inch/s
  Displacement: 0.001-4.000mm Equivalent Peak-Peak; 0.04-160.0 mil
  
  Frequency Range   Acceleration: 10Hz ~ 10kHz
  Velocity: 10Hz ~1kHz
  Displacement: 10Hz ~ 1kHz
  Accuracy   ± ( 5%n + 0.2 )
  Metric / Imperial Conversion  
  Analogue Output   AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k)
  Max. Value Hold  
  Power Off   Manual Power Off or Auto Power Off
  Battery Indicator   Low Battery Indicator
  Data Output   USB, RS-232
  Operating Conditions   Temperature: 0~50 °C Humidity: <90 %RH
  Power Supply   4 x 1.5V AAA size (UM-4) Battery
  Dimensions   140 x 73 x 35 mm
  Weight   415 g

Standard Accessories:
1. Main Unit
2. Magnetic Suction Seat
3. Piezoelectric Transducer
4. Probe (Cone)
5. Probe (Spherical)
6. Carrying Case
7. Manual Book
Optional Accessories:
1. USB, RS-232 data cable with software

Metro de vibración RCVM-06

* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use “USB data output” and “RS-232 data output” to connect with PC.
* Provide “Bluetooth ™ data output” choice.

Sensor   Piezoelectric Accelerometer
  Measuring Range
  Acceleration: 0.1~400 m/s²   0.3~1312 ft/s²   0.0~40 g   Equivalent Peak
  Velocity: 0.01~400 mm/s   0.004~16.0 inch/s   True RMS
  Displacement: 0.001~4.0 mm   0.04~160.0 mil   Equivalent Peak-peak
  Frequency Range   Acceleration: 10 Hz ~ 1k Hz   10 Hz ~ 10k Hz
  Velocity: 10 Hz ~ 1k Hz
  Displacement: 10 Hz ~ 1k Hz
  Accuracy   5 % of Reading + 2 digits
  Metric / Imperial Conversion  
  Analogue Output   AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k)
  Max. Value Hold  
  Power Off   Manual Power Off or Auto Power Off
  Battery Indicator   Low Battery Indicator
  Data Output   USB, RS-232, Bluetooth
  Operating Conditions   Temperature: 0~50 °C Humidity: <90 %RH
  Power Supply   4 x 1.5V AAA size (UM-4) Battery
  Dimensions   124 x 62x 30 mm
  Weight   120 g (Not Including Batteries)

Standard Accessories:
1. Main Unit
2. Magnetic Suction Seat
3. Piezoelectric Transducer
4. Probe (Cone)
5. Probe (Spherical)
6. Carrying Case
7. Manual Book
Optional Accessories:
1. Headset
2. USB, RS-232 data cable with software
3. Bluetooth data out put with software

Si usted está interesado en nuestros productos por favor enviar sus peticiones a nosotros por E-MAIL,

Le responderemos tan pronto como sea posible