 |
Schwingungsmessgerät
RCVM-01
Application: used for measuring periodic motion, to check the imbalance
and deflecting of moving machinery.
Is pecifically designed for present measuring various mechanical
vibration. So as to provde the data for the quality control, run time
and equipment upkeep.
Iuse the high-performance acceleration meter, realize the repetitiveness
and accurate measurement.
It has the function of displaying "Velocity, Acceleration, Displacement"
in same time.
SPECIFICATIONS
Display: 4 digit LCD backlight
Measurement Range:
Velocity : 0.01-400.0 mm/s 0.000-16.00 inch/s true RMS
Acceleration : 0.1-400.0 m/s² 0.3-1312 ft/s² 0.0-40g equivalent peak
Displacement : 0.001-4.000mm 0.04-160.0 mil equivalent peak-peak
Frequency Range for Measuring:10Hz. to 10kHz.
Accuracy: 5% of reading + 2 digits
Metric/ Imperial conversion
Analogue Output: AC output 0~2.0V peak full scale
(load resistance: above 10k)
With Max. value hold and low battery indication
PC interface: RS232C or Bluetooth interface
( Cable and software is not included)
Power supply: 2x1.5v AA size (UM-3) batteries
Power off : Manual off at any time or auto power off is enabled by user
Operating conditions:
Temperature : 0-50 ℃
Humidity : below 95% RH
Dimensions: 124x62x30mm/4.9x2.4x1.2 inch
Weight: 120g (not including batteries)
Accessories included :
Powerful rare earth magnet 1 pc.
Accelerometer 1 pc.
Stinger probe (Cone) 1 pc.
Stinger probe (Ball) 1 pc.
Carrying case 1 pc.
Operation manual 1 pc.
Optional accessories: Headphones for use as electronic stethoscope
Cable and software for RS232C
|
 |
Schwingungsmessgerät
RCVM-02(3D)
Application: used for measuring periodic motion, to check the imbalance
and deflecting of moving machinery.
Is pecifically designed for present measuring various mechanical
vibration. So as to provde the data for the quality control, run time
and equipment upkeep.
Iuse the high-performance acceleration meter, realize the repetitiveness
and accurate measurement.
It has the function of testing axle bearing situation.
SPECIFICATIONS
Vibration Sensor:3-Axis Piezoelectric accelerometer
Display: 4 digit LCD backlit
Axial Vibration: any one axis of X ,Y,Z or 3 axes of XYZ
Measurement Range:
Velocity : 0.01-400.0 mm/s 0.000-16.00 inch/s true RMS
Acceleration : 0.1-400.0 m/s² 0.3-1312 ft/s² 0.0-40g equivalent peak
Displacement : 0.001-4.000mm 0.04-160.0 mil equivalent peak-peak
Frequency Range for Measuring:10Hz. to 10kHz.
Accuracy: 5% of reading + 2 digits
Metric/ Imperial conversion
Analogue Output: AC output 0~2.0V peak full scale
(load resistance: above 10k)
With Max. value hold and low battery indication
PC interface: RS232C or Bluetooth interface
( Cable and software is not included)
Power supply: 2x1.5v AA size (UM-3) batteries
Power off : Manual off at any time or auto power off is enabled by user
Operating conditions:
Temperature : 0-50 ℃
Humidity : below 95% RH
Dimensions: 124x62x30mm/4.9x2.4x1.2 inch
Weight: 120g (not including batteries)
Accessories included :
Powerful rare earth magnet 1 pc.
Accelerometer 1 pc.
Stinger probe (Cone) 1 pc.
Stinger probe (Ball) 1 pc.
Carrying case 1 pc.
Operation manual 1 pc.
Optional accessories: Headphones for use as electronic stethoscope
Cable and software for RS232C
|
 |
Schwingungsmessgerät
RCVM-03
Applications：
Used for measuring periodic motion, to check the imbalance and
deflecting of moving machinery. Specifically designed for
present measuring various mechanical vibration. So as to provide
the data for the quality control, run time and equipment upkeep.
* Can display the parameters of Displacement, Velocity and
Acceleration simultaneously.
* In accordance with ISO 2954, used for periodic measurements,
to detect out-of-balance, misalignment and other mechanical
faults in rotating machines.
* Specially designed for easy on site vibration measurement of
all rotating machinery for quality control,commissioning, and
predictive maintenance purposes.
* Individual high quality ccelerometer for accurate and
repeatable measurements.
* With Max Hold function.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Bearing condition monitoring function.
* Use “USB data output” and “RS-232 data output” to connect with
PC.
* Provide “Bluetooth ™ data output” choice.
|
Sensor |
Piezoelectric Transducer |
|
Measuring Parameters & Range |
Acceleration: 0.1-300.0m/s² equivalent peak
985ft/s²
|
|
Velocity: 0.01-300.00mm/s true RMS
0.000~13.00inch/s |
|
Displacement: 0.001-3.000mm 0.04~120.0mil
equivalent pk-pk |
|
Frequency Range |
Acceleration: 10 Hz ~ 10k Hz |
|
Velocity: 10 Hz ~ 1k Hz |
|
Displacement: 10 Hz ~ 1k Hz |
|
Accuracy |
±5% + 2digits |
|
Metric / Imperial Conversion |
|
|
Max. Value Hold |
|
|
Power Off |
Manual Power Off or Auto Power Off |
|
Data Output |
USB, RS-232 |
|
Operating Conditions |
Temperature: 0~50 °C Humidity: <90 %RH |
|
Power Supply |
Lithium battery |
|
Dimensions |
202x43x23 mm ( 8.0x1.7x0.9 inch ) |
|
Weight |
130 g (Including Batteries) |
Standard
Accessories:
1. Main Unit
2. Carrying Case
3. Manual Book
Optional Accessories:
1. USB, RS-232 data cable with software
2. Bluetooth data out put with software
|
 |
Schwingungsmessgerät
RCVM-04
* 2 same parameters in one
display for 2 position measurement or 1 position measurement specified,
showing 3 different parameters of velocity, acceleration and
displacement in 1 display.
* In accordance with ISO 2954, used for periodic measurements, to detect
out-of-balance, misalignment and other mechanical faults in rotating
machines.
* Specially designed for easy on site vibration measurement of all
rotating machinery for quality control,commissioning, and predictive
maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable
measurements.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use “USB data output” and “RS-232 data output” to connect with PC.
|
Sensor |
Piezoelectric
Transducer |
|
Measuring
Parameters & Range |
Acceleration: 0.1-400.0 m/s Equivalent Peak; 0.3-1312
ft/s ; 0.0-40g
|
|
Velocity: 0.01-400.0 mm/s True RMS; 0.004-16.00 inch/s |
|
Displacement: 0.001-4.000mm Equivalent Peak-Peak; 0.04-160.0
mil |
|
Frequency Range |
Acceleration: 10Hz
~ 10kHz |
|
Velocity: 10Hz
~1kHz |
|
Displacement: 10Hz
~ 1kHz |
|
Accuracy |
± ( 5%n + 0.2 ) |
|
Metric / Imperial
Conversion |
|
|
Analogue Output |
AC Output 0~2.0 V
Peak Full Scale (Load Resistance: Above 10k) |
|
Max. Value Hold |
|
|
Power Off |
Manual Power Off or
Auto Power Off |
|
Battery Indicator |
Low Battery
Indicator |
|
Data Output |
USB, RS-232 |
|
Operating
Conditions |
Temperature: 0~50
°C Humidity: <90 %RH |
|
Power Supply |
4 x 1.5V AAA size
(UM-4) Battery |
|
Dimensions |
140 x
73 x 35 mm |
|
Weight |
330 g |
Standard Accessories:
1. Main Unit
2. Magnetic Suction Seat
3. Piezoelectric Transducer
4. Probe (Cone)
5. Probe (Spherical)
6. Carrying Case
7. Manual Book
Optional Accessories:
1. USB, RS-232 data cable with software |
 |
Erschütterungs-Messinstrument
RCVM-05
* 3
same parameters in one display for 3 position measurement or 1 position
measurement specified, showing 3 different parameters of velocity,
acceleration and displacement in 1 display.
* In accordance with ISO 2954, used for periodic measurements, to detect
out-of-balance, misalignment and other mechanical faults in rotating
machines.
* Specially designed for easy on site vibration measurement of all
rotating machinery for quality control,commissioning, and predictive
maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable
measurements.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use “USB data output” and “RS-232 data output” to connect with PC.
|
Sensor |
Piezoelectric Transducer |
|
Measuring Parameters & Range |
Acceleration: 0.1-400.0 m/s Equivalent Peak; 0.3-1312
ft/s ; 0.0-40g
|
|
Velocity: 0.01-400.0 mm/s True RMS; 0.004-16.00 inch/s |
|
Displacement: 0.001-4.000mm Equivalent Peak-Peak; 0.04-160.0
mil |
|
|
|
Frequency Range |
Acceleration: 10Hz ~ 10kHz |
|
Velocity: 10Hz ~1kHz |
|
Displacement: 10Hz ~ 1kHz |
|
Accuracy |
± (
5%n + 0.2 ) |
|
Metric / Imperial Conversion |
|
|
Analogue Output |
AC
Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k) |
|
Max.
Value Hold |
|
|
Power Off |
Manual Power Off or Auto Power Off |
|
Battery Indicator |
Low
Battery Indicator |
|
Data
Output |
USB,
RS-232 |
|
Operating Conditions |
Temperature: 0~50 °C Humidity: <90 %RH |
|
Power Supply |
4 x
1.5V AAA size (UM-4) Battery |
|
Dimensions |
140 x 73 x 35 mm |
|
Weight |
415
g |
Standard Accessories:
1. Main Unit
2. Magnetic Suction Seat
3. Piezoelectric Transducer
4. Probe (Cone)
5. Probe (Spherical)
6. Carrying Case
7. Manual Book
Optional Accessories:
1. USB, RS-232 data cable with software |
 |
Schwingungsmessgerät
RCVM-06
* In accordance with ISO 2954, used
for periodic measurements, to detect
out-of-balance, misalignment and other
mechanical faults in rotating machines.
* Specially designed for easy on site
vibration measurement of all rotating
machinery for quality control,commissioning,
and predictive maintenance purposes.
* Individual high quality ccelerometer for
accurate and repeatable measurements.
* Wide frequency range (10Hz~10kHz) in
acceleration mode.
* Optional headphones for use as electronic
stethoscope.
* Bearing condition monitoring function.
* Use “USB data output” and “RS-232 data
output” to connect with PC.
* Provide “Bluetooth ™ data output” choice.
|
Sensor |
Piezoelectric Accelerometer |
|
Measuring Range |
Acceleration: 0.1~400 m/s²
0.3~1312 ft/s² 0.0~40 g
Equivalent Peak
|
|
Velocity: 0.01~400 mm/s
0.004~16.0 inch/s True RMS |
|
Displacement: 0.001~4.0 mm
0.04~160.0 mil Equivalent
Peak-peak |
|
Frequency Range |
Acceleration: 10 Hz ~ 1k Hz 10
Hz ~ 10k Hz |
|
Velocity: 10 Hz ~ 1k Hz |
|
Displacement: 10 Hz ~ 1k Hz |
|
Accuracy |
5 % of Reading + 2 digits |
|
Metric / Imperial Conversion |
|
|
Analogue Output |
AC Output 0~2.0 V Peak Full Scale
(Load Resistance: Above 10k) |
|
Max. Value Hold |
|
|
Power Off |
Manual Power Off or Auto Power Off |
|
Battery Indicator |
Low Battery Indicator |
|
Data Output |
USB, RS-232, Bluetooth |
|
Operating Conditions |
Temperature: 0~50 °C Humidity: <90
%RH |
|
Power Supply |
4 x 1.5V AAA size (UM-4) Battery |
|
Dimensions |
124 x 62x 30 mm |
|
Weight |
120 g (Not Including Batteries) |
Standard Accessories:
1. Main Unit
2. Magnetic Suction Seat
3. Piezoelectric Transducer
4. Probe (Cone)
5. Probe (Spherical)
6. Carrying Case
7. Manual Book
Optional Accessories:
1. Headset
2. USB, RS-232 data cable with software
3. Bluetooth data out put with software
|
